You are currently browsing the tag archive for the ‘canvas’ tag.

I’ve always wanted to make fabric wall art since my friend told me about it years ago. I finally bought the necessary equipment late last year but they have been sitting around, not used since. Finally I had the opportunity to make some because they were required for a photoshoot.

I had alot of fun making them. I am now planning to offer custom-made fabric wall art services at GOOOD Fabrics. So the idea is… 1. PICK A FABRIC… 2. PICK A WALL ART SIZE. I make them and they get delivered to you! Logistics are being sorted out, but do feel free to drop me an email to find out more.

Anyway, here’s what I did two weekends ago. I worked on 3 pieces of 15inches square canvases. By the way, I kept the canvas on the frame so that the fabric pattern and colours will appear bright and vivid against a white background, unless of course, you are using a dark fabric then I’d suggest you remove the canvas material, so you don’t get white bits showing through your dark fabric.

Difficulty level: 3 out of 5

1. Trim your fabric to size (I left about 2-3inches, depending on the thickness of the frame). I chose to use a 1.5inch thickness frame so it looks more sturdy. Make sure you pressed your fabric before doing this. You do not want any unsightly creases on your eventual frame… that’ll be such an eyesore! I used paper weights to keep the frame in place.

Laying the canvas over the fabric

2. Start pulling from the center of 2 ends. Note that you do not pull them so tight that they start to distort. Give it the right pressure so the fabric is nice and taut but not stretched. Staple one side first, followed by the opposite center side. Repeat this for the other 2 ends.

Start to staple the fabric from the center.

3. I then worked on the corners. Note that this is a new piece of fabric. I got too intent on the earlier fabric that I forgot to take pictures! Try to fold the corners neatly. Repeat for all 4 corners. You can also practice by gift-wrapping boxes first.

Closeup of the corners

4. Viola! Fabrics are like art pieces to me. Each pattern and colour chosen is no coincidence but well-thought out designs by the designers. Don’t they make lovely alternatives to paintings?! Smiles!

Finished series of 3 fabric wall art pieces!


My latest favourite tote bag’s strap gave way whilst we were holidaying in Taipei last week! *sob* It came loose on the second last day…

Loose strap - Probably from my 'abuse' *_*

I was just browsing some books on bag-making in one of the bookshops in Taipei and saw this bag that I really like. Then by chance, the strap came loose. So I decided to make one to replace this one. I wanted the same canvas look but used Alexander Henry’s fabric for the pocket and the interior fabric. Simply cannot do without a pretty fabric!

It took me almost 45mins to sketch out the pattern and the size I want. Then another 2 hours sewing the pieces together. I did this last night. It was real fun! If you want the template, drop me a note… I can email it to you. 🙂

Difficulty Level: 1 out of 5
Time taken: 2.5 –  3hours (including pattern sketching, fabric cutting and sewing)

Cut fabrics

Sewing the exterior - top canvas and bottom orange peach fabric

Closeup of the joint pieces

Prepping the exterior pockets - I made two, one for each side

Sewn pocket

I sewn both the sides (1cm) before making a bottom depth of 10cm

Cut the corners off

Sew the sides of the interior fabric

Do the same with the bottom. Cut the corner too.

Sewn the shoulder strap

Sewing the interior to the exterior body

Tada! Bag shot flat on table.

Prefer this shot 🙂

Thanks for dropping by... I will share my sewing journey with you. I do hope you leave me some comments or feedback or just say hi! (: